通過式清洗機洗車順序

Car washing sequence of walk-through washer

（1）先沖掉泥沙：用高壓水槍清洗時，要用高壓水槍從上到下將泥沙從車身表面沖掉。然后再清洗車的后部，洗下部。要注意將車輪和制動盤、翼子板和柵網上所沾的泥巴沖洗干凈

(1) Flush out the sediment first: when cleaning with the high-pressure water gun, use the high-pressure water gun to flush the sediment from the body surface from top to bottom. Then wash the rear of the car and the lower part. Pay attention to wash the mud on the wheel, brake disc, fender and grille

（2）噴灑洗車液：高壓水槍沖洗干凈車身之后接下來該給車上液了，將洗車液均勻的潑灑在車身之上，然后用多功能的高壓洗車機或者是手工的將洗車液擦拭均勻，不要使用洗衣粉、肥皂等

(2) Spray car wash liquid: After the high-pressure water gun has washed the car body, it is time to spray the car wash liquid evenly on the car body, and then wipe the car wash liquid evenly with a multi-function high-pressure car wash machine or manually, do not use detergent, soap, etc

（3）用洗車海綿擦拭車身：用洗車海綿將車上的洗車液在車身上擦拭一遍，然后使用高壓水槍將車沖洗干凈。

(3) Wipe the car body with a car wash sponge: wipe the car wash solution on the car body with a car wash sponge, and then wash the car with a high-pressure water gun.

（4）清除污漬：仔細清除車身上還殘留的一些污漬，這需要使用除垢水來配合使用。注意：在清除污漬時要沿著與汽車行駛相垂直的方向來擦拭。

(4) Remove stains: carefully remove some remaining stains on the body, which requires the use of descaling water. Note: When removing the stain, wipe it in the direction perpendicular to the driving direction of the car.

（5）將車身水分擦干：將污漬清除完以后用清水將車上的洗車液全部清洗干凈。然后將水分擦干，要確保在擦干之后整個車都沒有水跡

(5) Wipe the body dry with water: After removing the stains, clean all the car washing liquid on the car with clean water. Then dry the water. Make sure there is no water on the whole car after drying

洗車方法：不脫蠟洗車，即使用高壓水槍，配合洗車液，除去車身上的塵土、污垢。

Car washing method: wash the car without dewaxing, that is, use high pressure water gun and car washing liquid to remove dust and dirt on the car body.

此外在通過式清洗機清洗之前，要保持周圍環境在0-40℃之間，車身表面溫度也要在60℃以下，高壓水槍也不要離車身太近，要距離車身15cm以上。更多相關內容就來我們網站http://fdcyxzx.com咨詢！

In addition, before cleaning with the walk-through cleaner, the surrounding environment should be kept between 0-40 ℃, the body surface temperature should also be below 60 ℃, and the high-pressure water gun should not be too close to the body, but more than 15 cm away from the body. Come to our website for more relevant content http://fdcyxzx.com consulting service